Arrma ADX-10, Руководство пользователя

Страница: 25 / 40

WWW.ARRMA-RC.COM
© 2013 ARRMA Durango Ltd. A subsidiary of Hobbico, Inc.
25
Radio-gear Maintenance
Steering Maintenance
Receiver Access
Steering Access
If you want to replace or upgrade the steering servo, ESC
(electronic speed controller) or re-bind the transmitter, you
will need to access the receiver.
I f y o u f i n d y o u r c a r ’ s
steering feels loose it may mean you have to
adjust the servo saver. To do this you will have
to get access to the steering mechanism.
2mm Hex Driver
1
1
2
2
(Raider only) Remove four roof bolts with 2mm hex
driver, remove roof.
Disconnect steering link ball-joints on both sides with long
nose pliers.
Remove four bolts securing receiver box lid with 2mm
hex key, remove lid. Reinstallation is the reverse the
removal process.
Re m o v e f o u r b u t t o n s c r e w s a b o v e a n d f o u r
countersunk screws below servo box with 2mm hex
driver.
Tools Required
2mm Hex Driver 7mm Nut Driver or Cross Wrench Long-nose Pliers
ARRMA-RC.COM/
SUPPORT/
ARRMA-RC.COM/
SUPPORT/
Tools Required
3
4
Separate front sub assembly from rest of
chassis.
Remove two bolts holding steering assembly to chassis
with 2mm hex key.