Arrma ADX-10 BLX, Руководство пользователя

Страница: 15 / 40

WWW.ARRMA-RC.COM
© 2013 ARRMA Durango Ltd. A subsidiary of Hobbico, Inc.
15
Driveshaft Maintenance
Rear Axle Maintenance
Tools Required
7mm Nut Driver or Cross Wrench Long-nose Pliers
Every 20 runs or so it may be
necessary to clean and re-grease the drive-shafts as
well as check for wear and/or damage. Running in dusty,
sandy or wet conditions will mean that this will need to be
performed more frequently.
2
2
4
1
1
3
Remove rear wheel with 7mm nut-driver/cross wrench.
Separate camber-link from balljoint with pliers.
Visually check driveshaft is not twisted or bent. If necessary,
replace. Re-grease driveshaft ends and refit.
Remove driveshaft. Clean driveshaft ends and axle inputs
and differential out-drives.
Separate camber-link from ball joint with long-nose pliers.
Refit camber-link ball-joint with long nose pliers
and refit rear wheel with 7mm nut driver or cross
wrench.
Cloth Grease
Ev e r y 2 0 r u n s o r s o i t m a y
be necessary to inspect the rear axle for wear. Running the model
in dusty, sandy or wet conditions will mean that this will need to be
performed more frequently.
Tools Required
7mm Nut Driver or Cross Wrench Long-nose Pliers
Remove rear wheel with 7mm nut driver/cross wrench.
Remove rear hex hub and drive pin from axle.
ARRMA-RC.COM/
SUPPORT/
ARRMA-RC.COM/
SUPPORT/