Chapter 4
:
Installing and Connecting your Telephony Gateway
1.
Security Label
If you need to modify the Telephony Gateway’s default wireless security settings, or if you
want to configure any other wireless LAN settings, refer to the following instructions.
Accessing the Configuration Interface
Follow these steps to access the configuration interface. You should have already set up the
TG2492 as described in
Installing and Connecting your Telephony Gateway
(page 17).
1.
If security has been properly set up on your computer to access the wireless LAN on the
TG2492, use the connection utility for your operating system to connect to the wireless
LAN using its network name (SSID), as shown on the security label.
2.
If you cannot access the wireless LAN, you must first establish a wired Ethernet
connection between your computer and the TG2492.
3.
In your web browser, open the page http://192.168.0.1/ to access the wireless router
setup.
The Login screen displays.
Note: The default user name is “admin”. The default password is “password”, in lower case
letters.
4.
Enter the user name and password and click the Apply button to log in.
Release 24 STANDARD 1.1 March 2015
Touchstone TG2492 Telephony Gateway User Guide 24
Copyright ARRIS Enterprises, Inc. 2015. All Rights Reserved.