!
5.0 Preparing the Monitor Mount
NOTICE
To mount the ARRI Starlight or the Transvideo Starlight to the
Joystick / Monitor Mount, this Transvideo mounting bracket is
required.
Use the 1/4“ screw to mount the TRINITY Monitor bracket
to the Transvideo mounting bracket.
Mount the bracket on the back of the ARRI Starlight or
the Transvideo Starlight monitor.
NOTICE
Ensure that the bracket rod is mounted and facing in the
opposite direction from the BNC and power connectors of
the monitor.
Place the rod mounted on the monitor bracket into the
bushing of the TRINITY Joystick / Monitor Mount.
The photos show the setup for „regular“ usage.
NOTICE
If you a “regular” operator you will need to flip the image
in the monitor software on both axes.
You will find the more information in Chapter 8.
Left Handed or “goofy“ operators will have to attach the
monitor to the other side of the TRINITY Joystick /
Monitor Mount.
NOTICE
Make sure that the connectors are always pointing away
from the TRINITY Joystick / Monitor Mount.
16
