19
Vertical adjustment
• Unlock the two 3 mm hex screws at the front of the tilt module.
• Adjust the matte box into the desired positioning.
• Mark the position with the two screws.
• Use the marker if you want to go back to the original position.
Extension
• Open the black butterfly nut at the mini rods to slide the matte box forwards or
backwards (Fig. 1+2).
• Tighten the butterfly nut once the matte box is in the desired position.
Before fitting the matte box, install all rod-related accessories. Please ensure that
fitting the matte box is the last step.
NOTICE
Fig. 1
Fig. 2
Fig. 1
Fig. 2
Instructions
