13
3.6 LMB 6x6 Extra Rotatable Filter Stage
The Extra Rotatable Filter Stage gives the possibility to rotate an additional 6.6 inch x
6.6 inch filter 360°. It attaches to the basic module by sliding to the rear and fixed by two
thumb screws without the need for any tools. For extreme lightweight applications such
as gimbal and Steadicam the separate single filter stage works perfectly in conjunction
with any clamp or the Tilt and Flex Adapter. Each filter frame is secured with an extra tray
catcher which holds the filters in place perfectly.
Mounting the extra rotatable filter stage
• Before fitting the filter stage remove the rear clamp adapter.
• Open the grey screws at the left and the right side to unlock the clamp device (Fig. 1).
• Thread the third filter stage through the locking knobs.
• Slide the filter stage upwards.
• Lock the filter stage using the thumbscrews on both sides of the filter guides.
• The word “Top” is written on the rotatable filter stage to signify the right positioning
(Fig. 4).
Instructions
Fig. 1
Fig. 2
Fig. 3
Fig. 4
If the filter stage won’t slide into the
clamp device, loosen the black screws
at the left side of the filter stage.
Be aware that there are some limitations
with tilting when using the rotating filter
stage. It is mandatory to extend the
matte box slightly on the rods in the tilt
and flex arm when tilting is necessary.
NOTICE
