21
11.3
Ramp Mode / Dynamic or Constant
Selecting the field toggles between
Dynamic
ramp and C
onstant
ramp.
Constant Ramp
(preset) will keep the adjusted
ramp, regardless of the speed values.
Dynamic Ramp
The dynamic ramp can only be used when the
controller is used in Speed Mode, like the joystick.
Dynamic Ramp
is directly related the selected
tilt and pan speed.
Higher speed
will produce a
slower
and more
flat
ramp.
Lower speed
will produce a
faster
and
steeper
ramp.
11.4
Filter
Additional low pass filter function for encoder
based controllers, like the DEH-1.
When the DEH-1 is used in a car or a train,
vibrations of the vehicle may be transmitted
to the DEH-1's encoders.
This can lead to irritations in the pan and tilt axis.
In case of such irritations, the operator can use
the
Filter
function to set a low-pass filter value,
which allows to
eliminate
these disturbing
vibrations.
NOTE
A too high filter value may cause a
delay
in
response.
11.5
Ratio
Selecting
Ratio
will open a new touchscreen
display where you can select the required
Speed Ratio
of the selected axis (Pan / Tilt / Roll).
NOTE
When shooting with a extreme tele lens, it can
be very helpful to change the speed ratio
from
0
(1:1) to
-30
.
This will reduce the speed development to -30%.
NOTE
Refer to the
specific manuals
when using the
DRW-1
wheels or the
DEH-1
encoder head.
Additional Controls Setup
