manualshive.com logo in svg

ARRI IVS 435, Инструкция по эксплуатации

Поделиться
Скачать
ARRI IVS 435 Скачать руководство пользователя страница 66

SUB MENU

   VID ADJ
   MGC      OFF
   -VALUE
   WB       MAN
   -RED     30

   EXPOSE   180
   MM- DAT  ON
   Y/C-DAT  ON
   BNC-OUT  VBS
   FR       ON

    INTEREP.ON
   MODE     LIVE
 > -STORE
   EXIT

   LINE

   -BLUE    39

0

66

Inser

ter Facilities

6.4.13 Store image

The IVS can store one particular image, display that or
overlay it against the live image in front of the camera to
compare both images. The store image command will
grab one particular image, no matter of the selected
display mode. (Please see last chapter 6.4.12 ”

Display

mode” for information on different display modes, e.g.
Live, Store and Compare).

Move the cursor 

>

 with the keys   and   to the line

-STORE

. Pressing the key   or   will store one

particular image into the frame store. The line will change
for 1 second to 

 > -STORE   DONE

. To store a new

video image, leave the line 

-STORE

 and go back to

this line.

The stored image is memorized until a new image is stored
or until the IVS power was shot down.

Содержание IVS 435






























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды