manualshive.com logo in svg

ARRI IVS 435, Инструкция по эксплуатации

Поделиться
Скачать
ARRI IVS 435 Скачать руководство пользователя страница 64

SUB MENU

   VID ADJ
   MGC      OFF
   -VALUE
   WB       MAN
   -RED     30

   EXPOSE   180
   MM- DAT  ON
   Y/C-DAT  ON
   BNC-OUT  VBS
   FR       ON

    INTEREP.ON
   MODE     LIVE
   -STORE
   EXIT

 > LINE

   -BLUE    39

0

64

Inser

ter Facilities

6.4.11 Line interpolation on/off

Due to the rotating mirror shutter of the film camera, the
CCD chip of the IVS gets light only for a maximum of 50 %
of the time. All video assists will therefore have one true
video field and the next one will be the repetition of the
previous one. So the repeated video field does not have
new information. To improve this situation, the video assist
can be electronically enhanced with a so called line
interpolation.

Move the cursor 

>

 with the keys   and   to the line

LINE

. Pressing the key   or   will switch the line

interpolation on and off.

Note:

This setting effects only the video image while
the film camera is in run mode.

Содержание IVS 435






























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды