manualshive.com logo in svg

ARRI IVS 435, Инструкция по эксплуатации

Поделиться
Скачать
ARRI IVS 435 Скачать руководство пользователя страница 45

45

Inser

ter Facilities

6. Inserter Facilities

In addition to the usual video assist functions, the IVS offers
a variety of inserter facilities. There are three different groups
of information:

•

Format markings

Format markings, which are inserted electronically,
are often more visible than format markings on the
ground glass or on the ARRIGLOW.

•

Man readable information

Time code
User Bits
Camera status
IVS Film Counter
Additional text
Pull-down information

•

Machine readable information

VITC
White Line Flag

All inserted data are only available at the
outputs ”Video with data”.
All engravings from the ground glass
(i. e. TV-Safe etc.) are visible at all times at all
outputs.

Note:

All currently used settings are stored even if the
IVS or the camera is switched off or disconnected
from the power supply. After restarting the IVS
the settings are unchanged.

Содержание IVS 435






























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды