ARRI ARRIFLEX 16SR3 Скачать руководство пользователя страница 38

Страница: 38 / 113

Optics

Removing the Lens

The adapter remains on the camera.

• Press in the release button completely.
• Unlock the lens by turning counter-clockwise.
• Pull the lens straight out of the adapter.
• Immediately replace the protective cover for the

compensation adapter or another lens.

Removing the Lens Port Adapter

• Open the bayonet lock.
• Pull the adapter straight out of the camera.
• Immediately replace the protective cover or another lens.

Lens Support

When heavy lenses are used install the lens support. To
support heavy lenses, the lens support bridge LS-7

and a support ring

which is compatible

with the lens has to be installed.

Attaching the Lens

• Mount the support ring

on the lens. This is

usually done only once. The support ring then remains
on the lens.

• Place the lens support

from above on the

support rods and with slight pressure let it click in.

• Attach the lens to the camera and hold it firmly in

place.

• Push the lens support under the support ring.
• Tighten down the knurled knob

and pull tight

the clamp lever on the lens support

The clamp lever

can be locked in different

positions:

• Unlock the clamp lever by pulling it outwards and turn

to the desired position.

Содержание ARRIFLEX 16SR3


















































































































Результаты поиска

Содержание ARRIFLEX 16SR3

Отзывы:

Бренды по названию

Популярные бренды

ARRI ARRIFLEX 16SR3, Инструкция по эксплуатации

Результаты поиска

Содержание ARRIFLEX 16SR3

Отзывы:

Бренды по названию

Популярные бренды