manualshive.com logo in svg

ARRI ARRIFLEX 16SR3, Инструкция по эксплуатации

Поделиться
Скачать
ARRI ARRIFLEX 16SR3 Скачать руководство пользователя страница 16

Power Supply

14

Charger NCL 24 R

For all 24 V batteries.

To charge the on-board batteries NC 24/1,2 the
charger-adapter cable KC 38 is required.

For use see product description NCL 24 R.

Double Charger NCL 24/1,2 

To enable two on-board batteries to be charged simulta-
neously.
For use see product description NCL 24/1,2.

Mains Unit NG 12/24 R

The mains unit is suitable for use in the studio. Its use is
recommended when using electronic accessories with a
higher power consumption (e.g. eyecup-heating, Video-
Assist-System, Lens-Control-System). The mains unit has
a safety switch-off device overheating and a power
limiter.

For use see product description NG 12/24 R.

On-Board Battery NC 24/1,2

Capacity 1,2 Ah. For mobile operation.

• Plug the on-board adapter into the BAT-socket and

secure it with the knurled screw.

• Slide the on-board battery onto the on-board adapter

and clip onto the magazine - the magnet holder keeps
it securely in place.

Battery NC 24/7 R

Capacity 7 Ah.

For use see product description NC 24/7 R.

• Connect the battery cable KC 20 or the coiled battery

cable KC 29 into the BAT-socket on the camera.

• Make sure that the plug is locked in securely.

- Do not open the batteries!
- Charge batteries only with the ARRI charger!
- Do not bypass the fuse or temperature

switch! (Danger!)

- Do not heat NC-batteries!
- Do not short-circuit NC-batteries!

Содержание ARRIFLEX 16SR3


















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды