manualshive.com logo in svg

ARRI ARRIFLEX 16SR3, Инструкция по эксплуатации

Поделиться
Скачать
ARRI ARRIFLEX 16SR3 Скачать руководство пользователя страница 18

Magazines

16

4. Magazines

Coaxial magazines with or without TC recording unit
(time code) 

 are available. They are designed as

quick-change magazines and use the same mechanical
drive interface as previous 16SR systems.

For the HS camera (high speed) special HS magazines
are available with or without the TC-recording unit.

Do not use HS magazines on the normal
camera or standard magazines on the HS
camera!

16 SR II-magazines can still be used (without TC-
recording).

Loop Protector

The loop protector protects the film loop and the pres-
sure plate when the magazine is not attached to the
camera. the loop protector should always be kept on
the empty or loaded magazine until the magazine is
attached to the camera. If the magazine is removed
from the camera the loop protector should immediately
be attached to it.

guide pin

Содержание ARRIFLEX 16SR3


















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды