Safety Instructions
18
WARNING!
Overloading the Camera System by Persons or Objects
Risk of injury caused by the camera system tipping over.
Do not lean on the camera system.
Do not place any unauthorized objects on the camera system.
Do not hang any unauthorized objects on the camera system.
Use only accessories approved by ARRI. The use of accessories not approved by ARRI is at
your own risk. Please observe all relevant safety guidelines
WARNING!
Changing the Lens Mount while the Camera is Powered
Risk of electric shock and permanent damage to the camera and lens mount.
Always switch off the camera and disconnect all power supplies before changing the lens mount.
CAUTION!
Using the Camera or Camera Accessories in a Humid Environment and with Con-
densation
When moving the camera and the camera accessories from a cool to a warm location or
when the camera is used in a damp environment, condensation may form inside the cam-
era, on the sensor, and on internal or external electrical connections. Operating the cam-
era while condensation is present bears risk of electric shock and/or fire caused by a short
circuit.
Never operate the camera and camera accessories when condensation occurs.
After moving the camera and camera accessories from a cool to a warm environment, wait for
some time for the system to warm up.
To reduce the risk of condensation, find a warmer storage location.
CAUTION!
Hot Surfaces on Camera Body and Camera Accessories
During extended operation, high data rates and/or operation at high ambient temperatures,
the camera's surface and the area around the fan outlet can get hot. Direct sunlight can re-
sult in camera housing temperatures above 60° C (140° F).
Never cover, obstruct or block the fan in- or outlets while the camera is powered.
Do not place the camera system near any heat sources during operation.
At ambient temperatures above 25° C (77° F), protect the camera and camera accessories from
direct sunlight.