24
3.4 Menu Setting
3.4.1 Main Menu Description
Press “Menu” key to enter into main menu, which is showed as follows:
Function and Parameter
Description
Current Limit:
14.600A
Current Limit
：
Current Limit Value
Voltage Limit:
35.200V
Voltage Limit
：
Voltage Limit Value
Voltage Over:
36.000V
Voltage Over
：
Over Voltage Value
Beep:
*On Off
Beep
：
On Off
Knob:
*On Off
Knob
：
On Off
Interface:
*RS232 USB GPIB
Interface Choices
：
RS232 USB GPIB
Baud Rate
4800 *9600
Baud Rate Setting
300 600 1200 2400 4800 9600 19200
38400
Parity Check
*None Even Odd
Parity Check
None Even Odd
Data Bit:
5 6 7 *8
Data Bit
：
5 6 7 *8
Stop Bit:
*1 2
Stop Bit:
*1 2
RS232 Interface
Flow Control:
*On Off
Flow Control:
*On Off
USB Interface
Selecting USB
GPIB Interface
GPIB Address:
5
GPIB Address
：
Address Value
Notes: Except the parameters about knob, key sound and interface configuration,
other parameters in the main menu will not be saved when the power supply is
switched off. If you would like to store relevant parameters, please press “2nd” +
“Save” keys or make use of *sav command.
3.6 Storing and Recalling
Store and recall procedures are illustrated in the following:
1 Press “2nd” + “Save” keys to enter into electronic store menu, or press “2nd” +
“Recall” keys to enter into electronic recall men
2 Press keys or adjust the knob to select store or recall location (0~9).
3 Press “Enter” key to confirm and exit store or recall menu simultaneously. For a
store case, voltage and current values are saved in corresponding EEPROM and for a
