Aroma Professional AEM-810, Инструкция по эксплуатации

Страница: 7 / 12

Troubleshooting
There is no coffee coming out of the
espresso machine.
· The Water Reservoir is empty. Fill water between the
minimum and maximum line.
· The coffee grind is too fine. Grind coffee to medium
ground.
· There is too much coffee in the filter. Try putting less
coffee into the filter.
· Coffee has been compressed too much. Refill the Shot
Cup with coffee and do not tamp it.
Coffee comes out around the edge of the
filter holder.
· Filter holder is not fully locked into position.
· Coffee grounds collected around the
Portafilter .
Remove all excessive coffee ground on the rim.
· There is too much coffee in the filter. Try putting less
coffee into the filter.
· If the problem persists,
please contact our
customer service
department toll-free
at
(800) 276-6286
or through email at
CustomerService@
AromaCo.com .
7.
Note:
No steam is being generated.
· The Water Reservoir is empty. Fill water between the
minimum and maximum line.
· The appliance is not turned on. Turn on unit and follow
the operating instructions.
· The Steam Wand is blocked. Turn off the unit, allow it to
cool. Then unplug it and clean out Steam Wand with a
needle or toothpick.
Milk is not foamy after frothing.
· The appliance ran out of water to create steam. Ensure
that there is enough water in the reservoir.
· Milk is not cold enough. Chill milk and frothing pitcher
prior to making cappuccino.
Coffee comes out too quickly.
· The coffee ground is too coarse. Use a finer grind.
· There's not enough coffee in the removable
Shot Cup .
Use more coffee.
( Cont. )