Aroma Professional AEM-810 Скачать руководство пользователя страница 6

6.

Before First Use

To Clean

1.  Read all instructions and important safeguards.

2.  Remove all packing materials and make sure that 

the product has been received in good condition.

3.   Take care to keep the electrical components on 

the exterior of the espresso machine dry. Wipe the 

exterior of the espresso maker with a damp cloth.

4.   Remove the 

Water Reservoir 

and wash with 

warm, soapy water. Rinse and dry thoroughly 

before returning to the espresso machine.

5.   Wash all other accessories including the 

Drip 

Tray

Portafilter

, and 

Cups 

as well, again making 

sure to rinse and dry thoroughly.

6.   Fill the 

Water Reservoir

 between the minimum 

and maximum line.

1.  Wipe the exterior of the espresso maker with a 

damp cloth, taking care to avoid the electrical 

components.

2.  Remove the 

Drip Tray

 and drain, if needed. 

Return to the espresso machine.

3.  Wash the 

Portafilter

 and removable shot 

cup with warm soapy water. Rinse and dry 

completely.

4.    Allow 

Steam Wand

 to cool completely for a few 

minutes. Remove plastic tube to wipe down metal 

Steam Wand 

with a damp cloth. Wash the plastic 

tube with warm soapy water. Dry completely. 

Return tube to wand for next use.

Note:

· Any other servicing 

should be performed by 

Aroma® Housewares.

Caution:

Always unplug the 

espresso maker 

and allow it to cool 

completely before 

cleaning.

  Never attempt to 

disassemble the 

espresso machine.

  Never immerse the 

espresso machine, 

power cord or plug in 

water.

  Always take care not 

to allow electrical 

components to come 

into contact with water.

  Do not use abrasive 

cleaners or scouring 

pads of any kind on 

the espresso machine. 

This will cause damage 

to the finish and may 

create a risk of electrical 

shock. 

Troubleshooting

The espresso machine and power switch 

light do not work when powered on.

· Make sure the espresso machine is connected to a 

functioning electrical outlet. 

The espresso machine won't start brew-

ing.

· The thermoblock heater is not hot enough yet. Wait 

until the 

Brew Key 

light remains constantly on. 

Содержание AEM-810













Отзывы: