7: Finely chopping small quantities
(depending on model)
ACCESSORIES USED:
• Mini chopper assembly
(j)
.
FITTING THE ACCESSORIES:
• Place the ingredients in the small chopper bowl
(j2)
.
• Fit the lid
(j1)
over the small chopper bowl
(j2)
and lock it by turning it clockwise.
• Place the assembly on the motor drive
(a)
USAGE AND TIPS:
• Turn the speed selector
(a3)
to position 2 to start up, holding the small chopper down on the motor drive
during operation. You can use the "Pulse" position for better control of mixing.
• With the small chopper
(j)
you can chop the fig in a few seconds:
- Fig
- Quantity /Maximum time: 50g/6s
8: Storage of the accessories
• Your food processor has a built-in storage drawer
(i)
where you can place the multi-purpose blade
(d)
, and the
4 vegetable cutter inserts
(f)
.
• After putting the accessories inside, slide the storage drawer
(i)
inside the motor unit
(a)
.
Cleaning
• Unplug the appliance.
• To make cleaning easier, rinse the accessories each time after use.
• Wash and dry the accessories: they are dishwasher proof.
• Pour hot water with a few drops of washing up liquid into the blender jug
(h3)
. Close the lid
(h2)
, with the
measuring cap
(h1)
fitted. Press the pulse button a few times. Unplug the appliance. Rinse the jug.
• Do not immerse the motor unit
(a)
in water, or place it under running water. Wipe it with a damp sponge.
•
The blades of the accessories are very sharp. Handle them with precaution.
Tip: If your accessories are stained by food (carrots, oranges…), wipe them with a cloth soaked with cooking oil,
then clean as usual.
Storage
• Do not store your food processor in a damp place.
• Use the storage drawer
(i)
to store the multi-purpose blade
(d)
and up to 4 vegetable-cutter inserts
(f)
.
If your appliance will not operate, what should you do?
• If your appliance will not operate, check:
- that your appliance is plugged in correctly.
- that each accessory is locked in place correctly.
• If your appliance will still not operate, contact an approved centre service (see list in the Service manual).
Disposal of packaging materials and the appliance
• The packaging only contains materials that are harmless to the environment that may be disposed
of according to recycling standards.
To scrap off your appliance, contact the appropriate department of your local council.
5
STARTING AND TIPS:
• Insert the food into the lid funnel and guide it with the food pusher
(b1)
.
• Turn the speed selector
(a3)
to position 1 to slice or position 2 to grate.
You can prepare with the inserts (depending on model):
. coarse grating
(C)
/fine grating
(A)
: celeriac, potatoes, carrots, cheese…
. thick slicing
(H)
/fine slicing
(D)
: potatoes, onions, cucumbers, beetroot, apples, carrots, cabbage…
5 : Emulsifying/beating/whisking
ACCESSORIES USED:
• Bowl assembly
(b)
.
• Drive pin
(c)
.
• Emulsifying disk
(e)
.
FITTING THE ACCESSORIES:
• Fit the bowl
(b3)
onto the motor unit
(a)
and lock it in place.
• Slide and lock the emulsifying disk
(e)
the right way up onto the drive pin
(c)
,
and fit the assembly onto the motor unit drive
(a1)
.
• Place the ingredients in the bowl.
• Fit the lid
(b2)
and lock it onto the bowl
(b3)
.
• To remove the bowl-lid assembly: release the lid then release the bowl.
STARTING AND TIPS:
• Turn the speed selector
(a3)
to position 2 to start.
• Do not use this accessory to knead heavy pastry or mix light pastry.
You can prepare: mayonnaise, aioli, sauces, egg whites (1 to 6), whipped cream, Chantilly cream (up to 0.2 litres).
6 : Homogenising/mixing/fine blending
(depending on model)
ACCESSORIES USED:
• Assembled blender jug
(h)
.
FITTING THE ACCESSORIES:
• Place the ingredients inside the blender jug
(h3)
below the maximum level line on the jug.
• Fit the lid
(h2)
, equipped with the measuring cap
(h1)
, and lock it in place on the jug.
• Place the jug assembly
(h)
onto the motor unit drive
(a2)
, with the blender jug handle facing you.
• Wait until the food processor has stopped completely before removing the blender jug from the motor unit.
STARTING AND TIPS:
• Turn the speed selector
(a3)
to position 1 or 2 to start.
You can use the pulse position, for better control of the mixture.
• Do not fill the blender jug with boiling liquid.
• Do not use the blender jug to grind dry foods (walnuts, almonds, peanuts…).
• Always use your mixer bowl with its lid.
• Do not use the blender jar to grind ice cube.
• Always pour liquid ingredients first into the jug before adding the solid ingredients, below the maximum
capacity:
- 1 l for thick mixtures.
- 0.8 l for liquid mixtures.
• To add ingredients when blending, remove the measuring cap
(h1)
from the lid and pour the ingredients
through the filling hole, and do not fill above the maximum filling line on the jug.
Maximum operating time: 3 min.
Tips:
• When blending, if some ingredients stick to the sides of the jug, stop the appliance and unplug it. Remove the
blender jug assembly from the appliance. Using the spatula, push the preparation onto the blade. Do not use
your hands or fingers inside the bowl or close to the blade.
You can:
• prepare finely blended broths, veloutés, soups, stewed fruit, milk-shakes, smoothies, cocktails.
• mix all kinds of batters (pancakes, doughnuts, clafoutis).
4
Fit the emulsifying
disk the right way up:
see illustration 5.
EN
EN
