Arnica jumbo, Инструкция по эксплуатации

Страница: 8 / 12

8
and unfaulty.
• Put water into the transparent water tank. The water level shouldn’t exceed
the Red Line (Max. 2 Liters)
• Place water filter body on the transparent water tank.
• Place water filter sponge on the cartridge, then place cartridge on the water
filter body.
4.6 Place upper body group on the lower body group and lock by using
locking peg.
4.7
• Place the connection part of the hose into the suction inlet by pushing it,
then turn it into any direction until you hear the locking sound.
• To remove the hose, press the lock button on the connection part and pull
the hose.
ATTENTION: Only use your appliance for dry vacuuming!
5. Operating the Appliance
• Choose the suitable accessories and place these accessories into the
handgrip or into the suction tube.
• To achieve the best results use the following accessories:
o Floor Brush for carpet, rug and hard floors (D5)
o Crevice Nozzle for narrow corners (D2)
o Suction Tube for soil, shavings and crumbs (C5 & C7)
o Small Nozzle for removing dust from shelves, lamb shades, frames ,
ornaments etc. (D4)
o Round Brush for curtains (D3)
5.1
• Plug the appliance into the wall socket and turn it on by using ON/OFF
switch (A1)
5.2
• For blower function, remove the foam filter by turning it around and pulling
it
• Place the suction hose into the air outlet by pressing it and turning it around
until you hear the locking sound.To remove the hose, pres the lock button
on the connection part and pull the hose.
aning and Maintenance
• Always make sure that the device is unplugged before any cleaning and
maintenance activities.
• Always empty the dirty water inside the transparent tank after every use.
Clean and dry the transparent tank afterwards.
• To ensure perfect hygiene and extend the life of the vacuum cleaner never
leave water or dirt inside your vacuum cleaner.
• Remove the hose group before emptying the water tank. Then unlock the
locking peg and remove the upper body part.
• Remove Water Filter Body (B2).
• Remove Water Filter cartridge from walter filter body (B3)
• Remove Water Filter Sponge from Water Filter cartridge.
• The water filter sponge can be washed with soap under warm water. Dry
it before placing it back into the water filter cartridge. Never wash it in
washing machine!
• Wash Water Filter Body with tap water.
• Always use original accessories to extend the lifetime and guarantee of the
product . The original accessories can be obtained from certified service
center.
• Never vacuum wet surfaces or water.
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
A. Upper Body Group
This group consists of motor, switch and operation units.
• A1. ON/OFF Switch
• A2.Foam Filter
• A3.Suction Inlet
• A4.Locking Peg
B. Lower Body Group
This is the lower part of the claeaner for collecting dust and dirt into the
water.This group is fastened with Motor unit using clip locks.
• B1. Lower Body (Transparent Tank)
• B2. Water Filter Body
• B3. Water Filter Sponge (to be placed into the water
filter cartridge)
• B4. Water Filter Cartridge (to be placed into the housing
on lower body)
• B5. Wheels
C. Hose Group
This group consists of suction hose with hand grip and suction tubes.
Suction hose is connected to container group by inserting the suction hose
into suction inlet. Suction tubes can be connected to hand grip as well.
Handgrip contains manual sliding for regulating suction power. Hose group
can be placed onto the motor unit by the help of hanger.
• C1. Flexible Hose
• C2. Hand Grip
• C3. Suction power Control Slider
• C4. Connecting part
• C5. Plastic Suction Tube (Jumbo Model Only)
• C6. Hanger
• C7. Telescopic Suction Tube (Jumbo Plus Model Only)
D. Accessories Group:
There are various accessories for different cleaning purposes.
• D1. Accessories Holder (Jumbo Eko doesn’t have this accessory)
• D2. Crevice Nozzle
• D3. Round Brush (Jumbo Eko doesn’t have this accessory)
• D4. Small Nozzle (Jumbo Eko doesn’t have this accessory)
• D5. Floor Brush
• D6. Perfume (Jumbo Eko doesn’t have this accessory)
3. TECHNICAL SPECIFICATIONS
Voltage : 230V ~, 50Hz
Power : 2400 W Max.
Electric Insulation Class : II
Degree of Protection : IPX4
Cord Length : 5m
Used Life : 10 Year
Max. Noise Level : Less than 70 dB (A) EN ISO 7779
4. Preparing for Use
ATTENTION!
The device must be unplugged before use. Do not insert the plug
int the wall socket until the appliance is completely ready for use.
4.1 Unlock the locking peg
4.2 Remove the Upper body by using the handle
4.3 Remove the Water Filter Cartridge
4.4 Remove the Water Filter Body
4.5
• Check if all the accesories mentioned in the Instructions Manual are present