tightened, it pauses and you might check if the current mode
passes to your requirement.
The repeated slight loosening of
the head will continue the increasing and allows keeping on
the cycle. When 100% of brightness is reached, the
flashlight starts to gain its brightness from zero. The
flashlight saves your choice after confirmation by tighte-
ning/loosening the head, and it changes the Setting Mode to
the standard operation one.
Item 2. Flashlight Modes Reset to Factory Defaults
Entry: when you confirm your choice by tightening/loosening the
head at double blinking, which indicates the Item 2 of the menu,
your flashlight shows through indication the types of the Factory
Defaults pausing between them for 3 seconds:
l
Military
– the flashlight blinks once.
l
Outdoor
– the flashlight blinks twice.
Selection confirmation: tighten/loosen the flashlight head within
1 second while the required choice is activated or the flashlight
pauses after it. The Flashlight sets all modes and their quantity
in both Lines, makes the stabilization type as provided by default,
and then it changes the Setting menu to the standard operation
mode. If you do not make your choice within 1 minute, your
flashlight exits from the Setting Menu into the standard
operation mode without saving your selection.
The value by
default: Military.
Item 3. Modes Quantity Selection in the First Line
Entry: when you confirm your choice by tightening/loosening the
head at blinking for 3 times, which indicates the Item 3 of the
menu, the flashlight shows through indication the accessible
alternatives of the modes quantity pausing between them for 3
seconds:
l
1 mode
– the flashlight blinks once.
l
2 modes –
the flashlight blinks twice, and so on
.
Advanced Settings
Armytek
Predator
Selection confirmation: tighten/loosen the head within 1
second while the required choice is activated or the flashlight
pauses after it. The flashlight saves your selection and changes
the Setting Menu to the standard operation mode. If you do not
make your choice within 1 minute, your flashlight exits from the
Setting Menu into the standard operation mode without saving
your selection. You might set up to 10 modes of the stabilized
light in the First Line.
The value by default: the modes quantity in
the First Line is equal to 3 ones (Military Factory Default).
Item 4. Modes Quantity Selection in the Second Line
Entry: when you confirm your choice by tightening/loosening the
head at blinking for 4 times, which indicates the Item 4 of the
menu, the flashlight shows through indication the accessible
alternatives of the modes quantity pausing between them for 3
seconds:
l
1 mode
– the flashlight blinks once.
l
2 modes –
the flashlight blinks twice, and so on
.
Selection confirmation: tighten/loosen the flashlight head within
1 second while the required choice is activated or the flashlight
pauses after it. The flashlight saves your selection and changes
the Setting Menu to the standard operation mode. If you do not
make your choice within 1 minute, your flashlight exits from the
Setting Menu into the standard operation mode without saving
your selection. You might set up to 5 modes of any accessible
type in the Second Line.
The value by default: the modes quantity
in the Second Line is equal to 2 ones (Military Factory Default).
Item
5.
Voltage Supply Selection
Entry: when you confirm your choice by tightening/ loosening
the head at blinking for 5 times, which indicates the Item 5 of
the menu, the flashlight shows through indication the accessible
alternatives of the voltage supply types pausing between them
for 3 seconds: alternatives of the modes quantity pausing