ARMTEL LS-25(T), Руководство пользователя

Страница: 18 / 28

LS-25(T) WEATHERPROOF SPEAKER
User Manual
page 16/24 armtel.com
© Armtel info@armtel.com
ENG
2.3.2 When using LS-25(T) for its intended purpose, it is necessary to comply with
the requirements of safety measures defined by regulatory documents specified in clause
2.2.4 of this User Manual.
2.3.3 At the workplace, the personnel responsible for the operation of the LS-25(T)
must have User Manual.
ATTENTION! IN VIOLATION OF THE RULES OF OPERATION AND REQUIREMENTS
OF OPERATIONAL DOCUMENTATION, LS-25(T) MAY RESPECT HAZARDS.
2.3.4 To LS-25(T), as an electrical installation, during operation, general requirements
are presented to prevent electric shock and to comply with electrical safety measures.
2.3.5 LS-25(T) does not have internal elements serviced by operating personnel.
Operational personnel are not allowed to make changes to the design of the LS-25(T).
2.3.6 Disconnect LS-25(T) from еру signal sources if LS-25(T) is not used for a long
period.
2.3.7 During operation of LS-25(T) it is forbidden to use components that do not
correspond to those indicated in the Product Passport.
2.3.8 It is allowed to connect the LS-25(T) to the signal source only when the power of
the signal source is turned off, in order to avoid electric shock.
2.3.9 It is allowed to connect to the LS-25(T) only signal sources with the characteristics
corresponding to the input characteristics of the LS-25(T). Do not apply DC voltage to the
LS-25(T).
2.3.10 It is forbidden open LS-25(T) cover during operation period, if LS-25(T) has
connected to the signal source.
2.3.11 It is forbidden operation LS-25(T) with current-carrying elements or cable
damage.
2.3.12 When operating the LS-25(T), the general safety requirements must be
observed.
2.3.13 When operating the LS-25(T), other general safety precautions accepted by
the operating organization should be followed.
2.3.14 When operating the LS-25(T), all requirements of local regulatory documents
must be observed.
2.3.15 Violation of the rules and recommendations of the manufacturer for operation
LS-25(T) may lead to the failure of the LS-25(T) and the refusal of warranty repair.