Armstrong International
IOM-706 V2.0
Flo-Direct Water Heater
Typical System
Page 3 of 45
Flo-Direct water heaters are highly efficient, low maintenance systems.
Complete thermal exchange technology means no fuel is used for warm-
up or idle time and no energy is lost through conversion or exchange.
Without internal moving parts, there is very little to maintain.
Water conditioning is not required.
Flo-Direct systems are highly customizable at both a system
and component level.
The information in this manual
generally uses a 5 million Btu/hr unit and is intended to
be typical. Illustrations are not intended to be complete or
correct in every detail. System-specific drawings, including
wiring schematics, are provided with each unit and should be
referred to when installing and operating your system.
Common options:
Gravity drain (without a transfer pump)
Standard (consistent incoming water temperature) or modulating
burner actuator
Natural gas or propane fuel
Remote or integral tank
Other available options include:
Skid-packaged heaters
Performance matched components
Ultra-low NOx emissions
Non-standard fuels
Storage tank heating element
Peripheral components:
Digital mixing valves
Variable frequency drive pump
Hose stations
Optional services:
Turn-key installation
Installation project management
System assessment and optimization
Energy conservation measures (ECM)
For further information, visit http://www.armstronginternational.com/flo-direct
or contact Armstrong.
Note
: Armstrong provides separate IOMs for the burner, blower, and for optional
components. Consult the appropriate document for more information.
