Armstrong ABH 299 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 72

background image

North America • Latin America • India • Europe / Middle East / Africa • China • Pacific Rim

armstrong

international.com

Designs, materials, weights and performance ratings are approximate and subject to change without notice. Visit

armstrong

international.com for up-to-date information.

3

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or

any other appliance.

WHAT TO DO IF YOU SMELL GAS:

• Do not try to light any appliance

• Do not touch any electrical switch

• Do not use any phone in your building

Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier

instructions. If you can not reach your gas supplier, call the fire department.

ANSI Z21.13-2014/CSA 4.9-2014

UL 795-2011/CSA 3.4

SCAQMD 1146.2

Warning and Cautions

WARNING! If the information in this manual is not followed exactly, a fire or explosion may

result causing property damage, personal injury or death. Injury or death and property
damage are possible.

WARNING! These appliances MUST be installed by a properly licensed individual in the City
and State which the unit is being installed. All start up adjustments and subsequent service
work must be done by a similarly licensed contractor or a factory trained service individual.
Failure to comply could result in loss of warranty and or severe personal injury, death and or
substantial property damage. These instructions are required to be kept with the appliance
on the left side, in the pocket provided.

WARNING!
• The vent system is rated and designed to be 2 pipe sealed combustion only, PVC SCH 40

or CPVC SCH 40 or 80 or AL 29-4C stainless venting for all models. A factory engineered
venting system may allow for exceptions; consult factory for details.

• This heater installation must conform to the latest edition of the “National fuel gas code”

ANSI Z223.1 NFPA 54 and/or CAN/CGAB149 Installation codes. State and local codes might

also apply to Installation.

• Where required by the authority having jurisdiction, the installation must conform to the

standards for controls and safety devices for automatically fired heaters, ansi/asme heater

and pressure vessel code, Section IV, along with CSD-1.

• The heater, gas piping, water piping, venting and electrical must be installed by trained

& qualified personnel familiar with installation practices, local code, and licensing

requirements.

•

If the information in these instructions are not followed exactly, a fire or explosion may

result, causing property damage, personal injury, or death.

•

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or

any other appliance.

New York

EA 425-05-E

Massachusetts

C1-0319-441

SCAQMD

Compliant Rule1146.2

CEC Listed

California Energy Commission

«
1
2
3
4
5
...
»

Содержание ABH 299









































































Отзывы:

Нет отзывов

Похожие инструкции для ABH 299

Бренд: H2O Страницы: 50

Бренд: Laars Страницы: 4

Бренд: Vaillant Страницы: 12

economy plus c 50

Бренд: Glow-worm Страницы: 24

Бренд: Garland Страницы: 2

SYSTEM 2000 Accel CS

Бренд: ENERGY KINETICS Страницы: 3

Бренд: VOKERA Страницы: 12

EnduroTI ETI-1000

Бренд: HTP Страницы: 67

Бренд: HTP Страницы: 83

Бренд: OERTLI Страницы: 4

ALU PLUS HE 1100

Бренд: Sime Страницы: 128

Бренд: Potterton Страницы: 80

Бренд: Lattner Boiler Company Страницы: 6

Бренд: BENEKOV Страницы: 39

DOMIcompact F 30 B

Бренд: Ferroli Страницы: 44

DOMIcondens F 24 D

Бренд: Ferroli Страницы: 60

Biomatic plus 50

Бренд: Ariterm Страницы: 32

Promax System HE Plus A Range

Бренд: Potterton Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды