Armfield Instruction Manual
Pump Performance Curve
Pump Performance Curve for CDX 70/05 and CPm130
Environmental Conditions
This equipment has been designed for operation in the following environmental
conditions. Operation outside of these conditions may result reduced performance,
damage to the equipment or hazard to the operator.
a. Indoor
use;
b. Altitude up to 2000 m;
c. Temperature 5 °C to 40 °C;
d. Maximum relative humidity 80 % for temperatures up to 31 °C, decreasing
linearly to 50 % relative humidity at 40 °C;
e. Mains supply voltage fluctuations up to ±10 % of the nominal voltage;
f. Transient over-voltages typically present on the MAINS supply;
NOTE: The normal level of transient over-voltages is impulse withstand (over-
voltage) category II of IEC 60364-4-443;
g. Pollution degree 2.
Normally only nonconductive pollution occurs.
Temporary conductivity caused by condensation is to be expected.
Typical of an office or laboratory environment
20
