Armcor
XEP Installation Manual
15
The Armcor Air Solutions Warranty Policy should be read
in conjuction with the Terms and Conditions of Sale. These
are available on our website –
www.armcor.com.au
.
What The Warranty Policy Covers
The standard Armcor warranty policy is a parts only warranty for a 12 month period. If any
defect in your Armcor equipment is caused by
FAULTY MATERIALS
within the warranty period,
starting from the date of original purchase it will be rectified or replaced without cost.
Additional labour warranty is available and must be purchased at the time of ordering
in accordance with the warranty policy.
What The Warranty Policy Does Not Cover
—
Consequential damage.
—
Failure to start due to voltage conditions, blown fuses or other damage cause
by inadequate or interrupted electricity supply.
—
Damage caused by accident, misapplication, abuse, alteration, tampering or servicing
by anyone other than an authorized person.
—
Damage resulting from incorrect installation, commissioning or use other than
in accordance with the installation and operating instructions issued by Armcor
Air Solutions.
—
Damaged caused by using equipment being located in a corrosive atmosphere
or by filter neglect.
—
Replacement of any worn drive belts if applicable.
—
Costs incurred for regular maintenance services.
—
The original service call costs in identifying a warranty claim.
—
Freight and travel changes for work performed or parts supplied outside of all
capital cities in Australia.
—
Field wiring, refrigerant pipe run between units, the condensation drainpipe or
other accessories.
—
Any warranty work performed by Armcor Air Solutions outside of Melbourne metro
area will require the installing contractor to provide free of charge: Oxy/Acetylene
Equipment, Dry Nitrogen, Vacuum Pump, Refrigerant Gas, Reclaim Bottles, Recovery
Unit, and any other associated refrigerant tools.
9.1
9.2
9.
Warranty
/ 9. Warranty
