26
SEq
NO.
LOCATION/
ITEM TO
INSPECT/CHECK/
SERVICE
PROCEDURE
NOT FULLY MISSION
CAPABLE IF...
2 Recorder Body
Inspect for dirt, cracks, damage, miss-
ing parts. Scratches and gouges are
allowable if operation is not affected.
Clean as required.
Items are cracked
or damaged.
Some parts are
missing.
3
Battery
Compartment
and Cover
Inspect for moisture, corroded or
defective contacts. Inspect for cover
damaged.
Clean as required.
Contacts are
damaged or
corroded.
Cover is damaged.
4 Function
Switch
Check for functionality (without bat-
teries installed).
Switch is dysfunc-
tional.
5
Interface
Cable with
Connector
Inspect for damage. Inspect connec-
tor for moisture, corroded or defective
contacts.
Clean as required.
Cable is damaged.
Contacts are dam-
aged or
corroded.
6 Video Output
Jack
Inspect for moisture, corroded or
defective contacts.
Contacts are
damaged or
corroded.
7 Mount
Inspect for damage. Check for proper
operation.
Damaged.
8 Remote
Control
Inspect for dirt, cracks, or damage.
Scratches and gouges are allowable if
operation is not affected
Clean as required.
Cracked or
damaged.
OPERATIONAL CHECKS
9 Function
Switch
Install the batteries. Install the record-
er on the scope or connect to monitor.
Turn the switch to ON position. Verify
that the recording symbols appear on
the screen of the scope or monitor.
No symbols are
visible.
10 Remote
Control
Ensure the recorder responds to
remote control.
Recorder is unre-
sponsive.
POST-CHECKING PROCEDURES
11
Turn the switch to OFF position.
Remove the batteries.
Return the equipment to the storage/
carrying carton.
TABLE 4-2. CONTINUED
