B08-590
• B75 • 09/22 • GB • p. 10 of 20 • www.armano-messtechnik.com
Operating Instructions
PAXd – Display
5.4 Simulation
(only if write protection is disabled)
The PAXd allows you to simulate process values in the simulation menu. By using the optical buttons
and
2
,
the simulated value can be increased or decreased (
chapter 2 “Using the Optical Buttons”). Please note that the
display will not time out while performing a calibration.
Sensor 2
Simulation
Txt 57
Sensor 1
Sensor 2
*5
CJC Sensor
Average
*5
Differential
*5
Loop Curr
*26
2
20.0
S2 Simul
Txt 59
-200.0
850.0
2
20.0
Avg Simul
Txt 61
-200.0
850.0
2
3
20.00
Loop Test
Txt 63
3.5 mA
23.0 mA
2
20.0
S1 Simul
Txt 58
-200.0
850.0
2
20.0
CJC Simul
Txt 60
-40.0
135.0
2
20.0
Diff Simul
Txt 62
-200.0
850.0
2
3
3
3
3
3
3
32
7501V111-UK
Simulation
(only if Write-protection is disabled)
The 7501 allows you to simulate process values by entering the simulation menu. Using the
and
2
optical buttons, the
simulated value can be increased and decreased (see the section
Operating the optical buttons
). Please note that while
performing a calibration the display will not time out.
Only shown if dual sensor function is
selected.
*5
Not available in
HART 5 mode
*26
Not possible if Loop Current is not active.
Sensor 2
Average
Sensor 1
CJC sensor
Differential
Loop Test
“Monitor”
“Monitor”
“Monitor”
“Monitor”
“Monitor”
“Monitor”
Only shown if dual sensor function is selected.
Not possible if loop current is not active.
Not available in
HART 5 mode
