21
2. If the incoming connection from a device is a device that has been paired before, then the connection is automatic.
There is no need for user interaction here. The link will be established and the device will appear in the “List All
Devices” section. The Bluetooth indicator will also appear at the bottom of the screen to inform the user that a
Bluetooth connection is in progress.
3. You may now receive data or press the PRINT button to send the data to the remote device.
QuickConnect Operation
Introduction
The QuickConnect feature simplifies the connection process for everyday use so that the user does not have to go through
the menu process to establish a simple connection. The QuickConnect feature allows the user to connect to a predefined
remote device straight from the front panel while on the main weight screen.
The user can choose to predefine the Bluetooth remote device’s name or address, so that when the user conducts a
QuickConnect, the scale will look for a device in the vicinity that matches the predefined name or address and establish a
connection immediately.
The QuickConnect can also start “automatically” at reboot without any user interaction. This means that if the desired
QuickConnect set device is in range, as soon as the indicator comes out of startup, it will connect immediately to this device.
Setup
To setup Quick
Connect, select “QuickConnect Device” in the Bluetooth setup menu. A screen shows up showing fields to
enter values for Quick Connect.
N:
Name of the remote device to perform a quick connect to.
A:
Address of the remote device to perform a quick connect to.
AutoStart:
o
YES: This enables AutoStart. The QuickConnect process will begin at startup.
o
NO: This disables AutoStart. The QuickConnect needs to be initiated manually. This is explained below
under “QuickConnect”.
ADVANCED
[After the above area, the rest is advanced settings that only should be played with if you have some knowledge about
Bluetooth functionality]
LPort:
The default local port to use for connection.
Rport:
The default remote port to use for connection.
To change these fields, a horizontal menu is provided for your use.
LIST:
Opens a list of detected devices in the vicinity. This is the easiest way of entering a predefined device for
quick connect purposes. Simply make sure that the scale is near the remote device you want to connect to. Select
this option and press the ENTER key. The scale will scan the area for Bluetooth devices and present you with a list
of detected devices. Select a device and press ENTER to fill the Quick Connect fields.
AUTO:
Toggle AutoStart option for Yes/No.
NAME:
Manually enter the name of the device you want to quick connect to.
ADDR:
Manually enter the address of the device you want to quick connect to.
LPRT:
Enter the local port you want to use for link connection. [Set auto]
RPRT:
Enter the remote port want to use for link connection.
When you are satisfied with the settings, press the MENU key. This will save your settings so that the next time you power
up the scale, the settings will be preloaded. There is no need to come into this menu option to redo the settings again,
unless you want to change the Quick Connect parameters.
QuickConnect Process
Once the settings have been established, head over to the main weight screen. Make sure there are no connections
currently in progress (check to see if the Bluetooth indicator is showing).
AutoStart
To demonstrate how the system will automatically connect to the set QuickConnect device, make sure the QuickConnect
device is in the vicinity of the scale. Press the ON/OFF key until the screen goes blank. Wait for 5 seconds. Press the
