3
Your New Scale
Congratulations on your purchase of an Arlyn Digital Scale. This Scale offers a combination of versatility, accuracy and
simplicity in an easy to use and easy to maintain package. Advanced menu driven operating software, large memory capacity
and an easy to use menu structure allows the scale to be configured for almost any application. To obtain the best
performance and greatest utilization from your scale, read this instruction booklet completely and carefully.
Please enter the Serial Number, which is located on the scale serial plate. Retain this information for future reference.
No. .
Features
•
Easy to read, LCD Graphics display
•
Automatic Calibration
•
Multiple Tare Weights
•
No Moving Parts
•
Positive Overload Stops (most models)
•
Large Memory Capacity
•
Eight Unit Conversions Standard
•
High Accuracy Parts Counting on Many Models
•
Automatic or Numeric Entry Tare
•
Sealed “Click-Type” Control Panel
•
Abuse Resistant Stainless Steel Load Cell (most models)
•
Computerized Self Testing
•
Automatic Zero Tracking
•
Full Text and Floating Point Entry
•
On Line Help
•
Optional Time and Date
•
Optional Battery Operation
•
Optional Weight Average Function
•
Optional Configurable RS-232 Port
•
Optional Setpoints
•
Optional Analog Output
•
Optional Multiple Platforms
•
Optional Windows Interface Software
Precautions
1) Prevent inflammables and liquids from entering scale head.
2) Always use the included wall transformer when using AC outlet. NEVER replace the wall transformer with a plug. This could
cause electrical shock and severely damage to the scale.
3) Allow clearance on all sides of scale platform for accurate weighing.
4) Do not drop large loads on scale platform.
5) NEVER EXCEED THE RATED CAPACITY OF THE SCALE.
6) Do not pull on the connecting electrical cables.
7) Make sure that the scale and ramps are properly secured to the floor (most models).
Best Conditions for Weighing
1) The scale should be level.
2) Best operating temperature is about 68 degrees F.
3) The weighing area should be kept clean and dry.
4) The surface that the scale is resting on should be of solid construction and not prone to vibrations.
5) Don’t install the scale near heater or air conditioner vents.
6) Avoid drafts.
7) Utilize a stable AC power supply. Avoid heavy motorized equipment on the same power line.
8) Do not operate the scale in close proximity of RF transmitters like cell phones and walkie-talkies.
9) Warm-up the scale before use, or leave on “ready” mode.
Initial Set-Up and Operation
1) Carefully unpack scale from shipping carton. Save packing material for possible future use.
2) If the level legs are included separately, then screw one into each corner underneath the scale.
3) Place scale on a level surface and adjust the level legs so that all four legs are touching the surface.
