21
Note:
Pressing the On/Off button for more than 2 seconds at any stage saves the time and
date and exits the set-up mode. The meter automatically shuts off after 2 minutes if no
buttons are pressed. Settings stored up to that point are saved.
Step 8:
Set the day
(If day/month format is selected then Step 8 will set
month)
Press and release the Back or Forward button until
the correct day appears. Hold the Back or Forward button
down to scroll through quickly. When the correct day is
displayed, press the On/Off button. The year setting then
flashes on the display.
Step 9:
Set the year
Press and release the Back or Forward button until the
correct year appears. Hold the Back or Forward button down
to scroll through quickly. When the correct year is displayed,
press the On/Off button for two seconds to exit set up
mode.
Day flashing
Year flashing