Pairing a new
receiving device
and turning
the wireless
communication
ON
NOTE
: It is possible to turn the wireless communication on only for one receiving
device at a time. The last paired receiving device is set automatically on.
NOTE
: It is possible to register
up to 3 receiving devices.
4. Select an icon ( ).
It is possible to identify each
receiving device with an icon:
select between the options
("personal device" icon,
"hospital device" icon, no
icon) using the buttons.
The selected receiving
device is turned on
automatically. Its number
and icon will appear on the
mode selection screen with
the sign "On".
Your meter and device
are now ready for
wireless communication.
BLE mode selection
2. Press button.
1. Hold down the
button for
2 seconds to
turn on the meter.
3. Press button.
Setting at first use
- To follow the gray arrows ( ), press button.
- To select among different options, use the
buttons.
‐
To cancel a setting and return to the previous
level, hold down the button for 1 second.
‐
To turn the meter off (in any screen), hold down
the button for 3 seconds.
Wireless communication setup mode
Transmitting all test results
1. Select a number (1
‐
2
‐
3)
for the receiving device
( ).
3. Pairing starts automatically.
Check the settings of your receiving
device to finalize the pairing procedure.
2. Select "PrG".
Selection of
a different
receiving
device
1. Select the number of the
receiving device ( ).
3. Edit the icon assigned
(optional) ( ).
2. Select "On" ( ).
To the
BLE mode
selection.
SUCCESS
FAILURE
Back to step 3.
Check the
settings of
your receiving
device.
Turning
the wireless
communication
OFF
1. Select "OFF" ( ).
To the
BLE mode
selection.
Deletion of a
receiving device
1. Select the number of the
receiving device ( ).
3. Select "YES" ( ).
2. Select "DEL" ( ).
To the
BLE mode
selection.
This function is
accessible from
the MEM mode
and only when
wireless
communication
is ON
1. Select "MEM"
( ).
3. Confirm the number of
the receiving device
( ).
2. Select "ALL"
( ).
Wireless
communication
starts automatically.
Back to
step 3.
SUCCESS
FAILURE
Chapter 7 Using the wireless communication function
This chapter provides information on how to set the meter (transmitting device) for wireless communication via BLE. Before starting communication, also check the
instructions of your receiving device (smartphone, tablet, etc.).
When the wireless communication function is on, test results will be transmitted automatically after measuring blood glucose and removing the test strip (the
] ^_* + $
the settings of your receiving device.
It is also possible to transmit manually all previous test results whenever needed (e.g. when a new receiving device is registered, or when the usual receiving device
is not present at the time of measurement, or its battery ran out). For this function, see “Transmitting all test results” below.
