Blade sharpening needs to be done in a professional factory to ensure the
quality.
Note
ᷛ
Dull blade can’t cut paper correctly
᷍
Blade also will become dull if it
always cuts thick paper or pasteboard,If cutting quality and accuracy can’t
meet required standard,the blade needs be changed.Your work will go smoothly
if you always have one replacement standly.When you need to change blade,
you must operate according to the steps of blade change instruction.
Note:To avoid any injury,you must be the more careful when you change the
blade.
Ȑ
)[ZZOTMYZOIQGJP[YZSKTZ
One knife shim can be used for 8 times
；
When slash on the shim is too deep,you should adjust or change knife strip
；
Knife shim can be took out by screw which should be assembled onto the
cutting desk flatly when it needs to be set back;Knife shim should lean to
the left side
；
Note
：
When kinfe shim is being changed,the blade itself also needs to be
adjusted.If the blade cuts too deep,the knife will be damaged easily,and the
blade also will abrade rapidly.
