Ȑ
Cutting
HRGJKGJP[YZSKTZ
Cut the electricity power
；
First of all,fine adjust the cutter blade depth(adjust depth range about 2-3 mm)
or exchange the cutting side of stick.
Disassemle retaining screws on both sides of the upper cover,and then take
the upper cover away
；
Loosen seven M6 fasten screws on the blade which is on blade carrier,and
adjust the screws on blade carrier,until the blade cuts into the shim about
0.3-0.5mm
；
Tighten screws on blade carrier,Put on the up cover,then fix up
；
Choose one piece of paper to have a try.If it cannot be cut com pletaly,you
can readjust according to processes above.
