5
2.
Initial Preparation
Step 1: The airframe
1.
Ensure no accessories are short according to the package list.
2.
Locate the fuselage and a pair of wings and winglets;
a)
Screw off the screws and open the electronics hatch;
b)
Route the servo lines through the hole of the fuselage (see picture below);
c)
Servo lines should be connected to the ports on both sides. Beware the brown line should be connected to
negative port;
d)
Glue the wings to both sides of the fuselage. Beware the wings should be aligned with the edge. Pins or
toothpicks are recommended to align them;
e)
Glue winglets. Beware they should be aligned with the edge. The front surface should not be glued. Pins
or toothpicks are recommended to align them.
