Arjohuntleigh Sara Lite Скачать руководство пользователя страница 21

Страница: 21 / 32

Troubleshooting

.20

8.E

(*) Some wall outlets are controlled by wall/light switches. Ensure that power to wall outlet continues when
wall/light switch is turned off.

Lift Trouble

Resolution

Hand control does not
respond

•

Check the red emergency stop button on the control box.

•

Check the connector on hand control cord.

•

Check the battery condition (replace with a fully charged battery
pack).

RAISE and LOWER buttons
on control box do not
respond

•

Check the red emergency stop button on the control box.

•

Check the battery condition (replace with a fully charged battery
pack).

Actuator does not respond

•

Check the red emergency stop button on control box.

•

Check if the battery is installed correctly and fully charged. Test with
a new, fully-charged battery pack.

•

Check if the hand control is connected.

•

Check if the actuator is connected to the control box.

Audible “beep” is heard from
the control box

•

Battery is low. Replace with a freshly charged battery pack.

Actuator “stalls” during lift

•

Battery is low. Replace with a freshly charged battery. Do not exceed
the lifting capacity.

Charger Trouble

Resolution

“Power on” light on charger is
not lit

•

Check if the charger is plugged into the wall receptacle.

Charger is plugged in, but
“Power on” light is not lit

•

Check that there is power to the wall outlet.*

Yellow indicator does not
light when battery pack is
inserted in the charger, and
the green light is “ON”

•

Check that the battery pack is properly seated in the charger.

Battery Trouble

Resolution

Battery pack is properly
seated but no lights are
visible.

•

Call for service (charger may be faulty).

Yellow indicator light does
not go off after several hours
of charging time.

•

Battery pack needs replacing. Call ArjoHuntleigh for replacement.

Battery pack indicates it is
fully charged when in the
charger, but when placed in
the lift, will only do a few lifts.

•

Battery pack needs replacing. Call ArjoHuntleigh for replacement.

Troubleshooting

Содержание Sara Lite

































Результаты поиска

Содержание Sara Lite

Отзывы:

Бренды по названию

Популярные бренды

Arjohuntleigh Sara Lite, Инструкция по эксплуатации

Результаты поиска

Содержание Sara Lite

Отзывы:

Бренды по названию

Популярные бренды