manualshive.com logo in svg

Arjohuntleigh MAXI MOVE, Инструкция по эксплуатации

Поделиться
Скачать
Arjohuntleigh MAXI MOVE Скачать руководство пользователя страница 13

Product Description/Functions

13

001

.25

06

0.E

N

 re

v.

 1

1

Controls and Features

Control Handset

(See Fig. 6) To raise and lower the jib, open and
close the chassis legs, or to operate a powered
DPS spreader bar, press the appropriate button
on the control handset. Icons with direction
arrows are printed on each button for quick
reference.

Fig. 6

If button is released during any function, powered
motion will cease immediately. When not in use,
the handset can be conveniently stored for later
use by hooking it over the manoeuvring handle at
the rear of the mast. 

Control Panel

(See Fig. 7) An additional feature available on the
MAXI MOVE, is a mast-mounted control panel,
which operates in parallel with the control
handset, enabling powered operations to be
controlled from the lift mast as well as remotely by
using the handset. As with the handset, icons with
direction arrows are printed on each button for
quick reference.

Fig. 7

Stop Button (red)

(See Fig. 8) In an emergency, if you have to
immediately stop any powered movement (other
than by releasing a control handset button or
control panel button), press the stop button
located on the control panel.

Once the stop button has been used, the green
power button will have to be pressed before the
equipment can be operated again. To do this,
simply push in the button.

Fig. 8

Power Button (green)

(See Fig. 8) Located adjacent to the stop button,
this button is used to turn the unit on.

Handset

Display

DPS “Recline”

button

Jib “Down”

button

Chassis

“Legs Closed”

button

Jib “Up”

button

DPS “Sit Up”

button

Chassis

“Legs Open”

button

DPS “Recline”

button

Jib “Up”

button

DPS “Sit Up”

button

Chassis

“Legs Open”

button

Chassis

“Legs Closed”

button

Jib “Down”

button

Stop button

Power
button

Содержание MAXI MOVE






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды