Arjohuntleigh Malibu, Инструкция по эксплуатации

Страница: 15 / 60

15
Safety Belt
Attach and Buckle (3 steps)
1 Attach the safety belt to the chair by pushing the eyelets
over the knobs at the back of the chair (See Fig. 1) . When
buckling the safety belt: the arrow shape on the larger
fastening clip
(A) shall be positioned on the front side of the
safety belt. (See Fig.2)
2 Buckle the safety belt by inserting the buckle clips (B) into
each other. (See Fig. 3)
3 Unbuckle the safety belt by pressing the spring knobs at the
top and bottom of the buckle clips (B) , and at the same time
pulling the buckle clips (B) apart from each other.
(See Fig. 4)
Adjust (5 steps)
1 Pull the fastening clips (A) and (B) apart by twisting the
smaller fastening clip (A) slightly upwards. (See Fig. 5)
Continue with the steps on the next page.
WARNING
To prevent the patient from falling, make sure the
safety belts are undamaged. If damaged, do NOT
use the safety belts, replace with new ones before
use.
WARNING
To avoid falling, make sure that the patient is
positioned correctly and that the safety belt is being
used, properly fastened and tightened.
Fig. 1
Fig. 2
A
Fig. 3
B B
Fig. 4
B B
Fig. 5
B A