MRM Malibu/Sovereign
Service Procedures
29
SP 18. Perform a Safe
Working Load Test
(Local Requirement)
Applicable load test:
• Model: Malibu
• SWL:
130 kg (287 lbs.)
• Test load:
130 kg (287 lbs.)
Use the ArjoHuntleigh load test equipment and
refer to SP 015 for general information on load
testing.
1. Use three empty 5 l plastic water barrels.
2. Fill the barrels with lead shots up to a weight
of 130 kg. (Two full and one
1
/
5
full)
3. Operate the lift at its lowest level.
4. To ensure cleanliness, place a suitable
lightweight cover on the chair e.g. cloth,
plastic or paper sheet.
5. Load the barrels on the
Malibu
chair.
6. Raise the lift to apply and sustain the test
load of 130 kg for a period of approximately
ten seconds.
7. Lower the lift and unload the barrels: check
for any permanent deformation or damage.
Recommend the replacement of any
defective parts.
8. Clean down the chair.
9. Document the test results according to local
routines.
WARNING
Obey all relevant safety precautions.
WARNING
The SAFE WORKING LOAD (SWL) is
applicable to the model quoted. Always refer
to the SWL identified on the actual hoist
equipment.
NOTE
Do
not
make adjustments to exceed the
above limits
