Arjohuntleigh Bolero, Инструкция по эксплуатации

Страница: 17 / 44

17
From Bed
(11 steps)
1 Choose the appropriate end of the Bolero lift bath trolley to
act as back support and fasten the pillow there.
2 Attach the safety belt for the hip through to the knob and
pass it thorough so that it is on top of the stretcher.
3 Roll the patient to their side.
Move the Bolero lift bath trolley in over the bed as close as
possible to the patient and lower so that it is resting firmly
on the bed.
(See Fig. 1)
5 Apply brakes on all castors. (See Fig. 2)
6 Roll the patient over onto the stretcher. (See Fig. 3)
7 Raise the backrest to desired angle (with the back part of the
bed if necessary). Check that the catch is in place and the
backrest is locked.
(See Fig. 3)
8 Fasten the safety belt over the chest. (See Fig. 3)
9 Raise the stretcher a little, pull out safety belt and fasten it
over the hip. Lower the handle bar.
(See Fig. 4)
Continue with the steps on the next page.
WARNING
To avoid entrapment, make sure the path of the
movement is free from obstacles.
WARNING
To avoid entrapment of the patients or caregivers
legs or feet, make sure that they are kept clear of all
obstacles.
4
WARNING
To avoid falling during patient transfer, always
make sure that the brakes on the equipment
receiving the patient are applied.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Transfer the Patient