Arjohuntleigh 700.042 Series, Инструкция по эксплуатации

Страница: 10 / 16

001-04100-EN rev
. 2
Troubleshooting 6
Technical Specifications Troubleshooting
Care and Maintenance
PROBLEM TO CHECK
The Turntable does not move
when the cord is pulled.
• Verify that the cord is correctly installed into the
device.
• Try to pull the other cord.
There is a rough transition between
the fixed track and the Turntable.
• Verify the gap between the tracks (1 mm to 1.6 mm).
• Contact your local representative.
Preventive Maintenance Schedule
The BHM Turntable is subject to wear and tear, and the following actions must be performed when specified
to ensure that the product remains within its original manufacturing specification.
WARNING
: The points on this checklist are the minimum the manufacturer recommends. In some
cases more frequent inspections should be carried out. Continuing to use the
BHM Turntable
without
conducting regular inspections will seriously compromise the user and resident / patient’s safety.
Preventive maintenance specified in this manual can prevent accidents.
WARNING: Safety related maintenance and authorized service must be carried out by qualified
personnel, fully trained in servicing procedures by ArjoHuntleigh, and equipped with correct tools and
proper documentation, including Parts List and Service Manual. Failure to meet these requirements
could result in personal injuries and / or unsafe equipment.
POINTS TO BE INSPECTED BY
USER / SERVICE TECHNICIAN
FREQUENCY
Annually or 1500 cycles
Before every use
Initially
  
Inspect for evidence of external damage or missing parts.
  
Make sure the lift moves smoothly between the BHM Turntable pivoting track and fixed tracks (tracks
are well aligned and space between them is inferior to 1.6 mm [1/16 in]).

Make sure end stoppers of the BHM Turntable are in place and tightened.

Inspect pull cords for wear.

Annual Inspection by an Authorized Technician
The
BHM Turntable
must be inspected by a qualified ArjoHuntleigh, technician on an annual basis
to ensure the proper functioning of its components, as well as the safety of the patients and care
givers that use the
BHM Turntable
. Please contact your local representative to make arrangements.
NOTE : If the product does not work as intended, immediately contact your local ArjoHuntleigh,
representative for support.
Cleaning
To clean the BHM Turntable , wipe it down with a damp cloth using warm water and mild detergent.
CAUTION : Do not use phenol, chlorine or any other type of solvent that may damage the
finish.
To ensure a better rolling surface for the trolley wheels, clean the inside of the rail every four
months. To do so, insert a damp cloth in the opening and slide it from one end of the rail to the
other.