Mattress and Seat Systems Service Manual
Introduction
Page 3
Regulatory
The mattress replacement, overlays and seat systems identified in Table 1 have been designed to
comply with regulatory safety standards including:
• EN60601-1:1990/A13:1996 and IEC 60601-1:1988/A2:1995
• UL60601-1, UL2601-1 and CAN/CSA C22.2 No. 601.1-M90
• EN60601-1:2006 and IEC 60601-1:2005
• AAMI/ANSI ES60601-1:2006 and CAN/CSA C22.2 No.60601.1(2008)
Precautions
For your own safety and the safety of the equipment, always take the following precautions:
•
Do not expose the system to open flames, such as cigarettes, etc.
•
Do not use or store the system in direct sunlight.
•
Do not use phenol-based solutions to clean the system.
•
Make sure the system is clean and dry before use or storage.
Electromagnetic Compatibility (EMC)
This product complies with the requirements of applicable EMC Standards. Medical electrical equipment
needs special precautions regarding EMC and needs to be installed in accordance with the following
instructions:
•
The use of accessories not specified by the manufacturer may result in increased emissions by, or
decreased immunity of, the equipment, affecting its performance.
•
Portable and mobile radio frequency (RF) communications equipment (e.g. mobile/cell phones) can
affect medical electrical equipment.
•
If this equipment needs to be used adjacent to other electrical equipment, normal operation must be
confirmed before use.
Environmental Protection
Incorrect disposal of this equipment and its component parts, particularly batteries or other electrical
components, may produce substances that are hazardous to the environment. To minimise these
hazards, contact Arjo for information on correct disposal.
