AZI Customer Service 800-528-7411 Manual, ZSP-150-F Page 12 of 22
ZSP-150-F Rear Panel
The rear panel of the ZSP-150-F provides the power connector, an RS-232 connector, a USB
connector and a security bracket. The security bracket may be used to provide a convenient method
of securing the balance.
ZSP-150-F Rear Panel
RS-232 Front Panel Configuration
The RS-232 Configuration Mode allows changes to the baud rate, front panel control, software
protocol, parity and auto send parameters. The balance is preconfigured at Arizona Instrument to
communicate with the Computrac
®
Vapor Pro
®
moisture analyzers.
Any changes to the recommended configuration will affect communication with
the Vapor Pro
®
/
Vapor Pro
®
Rx
or Vapor Pro
®
XL.
It is not necessary to follow the entire configuration procedure on the next page if only one
parameter is to be changed. Follow steps 1 and 2, and then use the MODE button to cycle through
the different parameters. When the parameter to be changed is displayed, toggle the setting using
the SEND button until the desired setting is displayed. Save the setting using the RANGE /
FUNCTION button. The balance will confirm by displaying “SAVEd” and then return to normal
operation.
USB
RS-232
Power
Security
Bracket
