AZI Customer Service 800-528-7411 Manual, ZSP-150-F Page 9 of 22
ZSP-150-F Front Panel Display and Controls
Figure 4 - Balance Front Panel
The ON/OFF (I/O) Button
The ON/OFF (I/O) button is located in the upper left corner of the balance’s front panel. When the
balance is off, pressing the button will start the turn-on sequence shown in Figure 3. During this
sequence the balance is doing an automatic systems checkout to ensure it is functioning properly.
When the balance is on, pressing the ON/OFF button will turn off the balance.
The ZERO Buttons
There are two (2) ZERO buttons. Pressing either button at any time returns the display to zeros.
When a weighing that has been zeroed out is removed from the weighing pan, a negative reading is
displayed. To return the display to zeros, press one of the ZERO buttons.
The MODE Button
Pressing the MODE button starts the unit of weight cycle as follows: grams (g), carats (ct),
pennyweights (dwt), troy ounces (ozt), ounces (oz), pounds (lb), kilograms (kg), and milligrams (mg).
When the desired unit of weight appears, press the MODE button a second time to select that unit of
weight.
The SEND Button
The SEND button is not normally employed in everyday usage of the balance, although it is used in
certain specific configuration procedures, as detailed later in this manual.
