276
F
LUE
T
EST
F
EATURE
(
ONLY FOR AUTHORISED PERSONNEL
)
The “A” Summer/Winter/Flue Test selector knob can be
set to < > to bypass temperature adjustment on the
heating circuit for the purpose of analysing the fumes
produced by combustion. To access this mode, open a
water tap so that the flow rate is no less than 8 litres per
minute. Then push the “A” selector knob in and turn it
from < > or < > to the < > position.
-26-
C
AUTION
!
The flue test function makes the boiler run continuously at its maximum power.
This condition should be used exclusively by authorised personnel.
T
EST
M
ODE
The P.C.B. allows for the boiler to be pushed at its maximum or minimum thermal
capacity. For the relevant information, refer to section 3.7.5. of the “I
NSTALLATION
I
NSTRUCTIONS
”.
N.B. Should the boiler not be used for a long period of time, the condensate
trap must be filled up again before re-starting the boiler. Failure to add
water to the trap is dangerous because exhaust fumes could be released
into the environment.
A
Содержание ECO GENIUS
Страница 1: ...Users Manual...
Страница 27: ...276 27...