Ariston ECO GENIUS, Руководство пользователя

Страница: 11 / 28

276 -11-
code.
To reset the ignition system, the reset button “H”
must be pressed. Should the system fail to light a
second time, check to make sure that the gas cock
is open. If the problem persists, contact one of our
Authorised Service Centres.
Before starting the boiler, check the following:
- The water pressure on the pressure gauge “J”;
- That the gas cock and the inlet for domestic water are
open.
These models are equipped with electronic ignition which
utilises contact ionisation.
To make the boiler operational, simply press the switch “E”.
The red L.E.D. “D” will then turn on. At this point the boiler
is ready for use: a centralised electronic control unit will automatically light the
main burner when needed without any intervention from the outside. If the burner
does not light within the pre-set safety time limit, the display will show an error
S
TART
-
UP
P
ROCEDURE
E
J
H