SLT70 OPERATION MANUAL
Aristel
12
Aristel
,
the Best in Telecommunications
4.4.10
Dialing Delay Time Setting
Setting Status — 16+
cfm
Key + CO-dialing Delay Time (0~199) +
cfm
Key
Note: Some KTSs need a delay time of off-hook signal detection, then start to receive
dialing digits.
Default under General Mode: 016
(16*30ms=480ms,
unit: 30ms
)
Default under
Aristel
KTS Mode:
004 (4*30ms=120ms,
unit: 30ms
)
4.4.11
Hook Delay Time Adjustment
Setting Status — 17+
cfm
Key + Hook Delay Time (0~199) +
cfm
Key
Default under General Mode: 010
(10*30ms=300ms,
unit: 30ms
)
Default under
Aristel
KTS Mode:
030 (30*30ms=900ms,
unit: 30ms
)
4.4.12
Be Paged Duration Setting
Setting Status — 18+
cfm
Key + Be Page Duration (0~199) +
cfm
Key
Default: 199
(199*1s=199s,
unit: 1s
)
Note: While the telephone is paged , it will hang up after the Be paged Duration time out. The
setting value “000” means Be Paged Duration takes no effect.
4.4.13
Headset Enable/Disable
Setting Status — 19+
cfm
Key + “0” or”1” +
cfm
Key
(0: Disable, 1: Enable)
Default: 0
Note: When the headset is set enable, you will use a connected headset to have a call instead
of handset or handsfree. At this status,
SPK
is used to answer the call and hung up while the
hook switch takes no effect.
4.4.14
ARS/LCR Enable/Disable
Setting Status — 20+
cfm
Key + “0” or”1” +
cfm
Key
(0: Disable, 1: Enable)
Default: 0
4.4.15
Tone/Pulse dialing Switch
Setting Status — 21+
cfm
Key + “0” or”1” +
cfm
Key
(0: Tone, 1: Pulse)
Default:: 0
Note: If above set as “1” (Pulse), you may press
*
Key to change to Tone-dialing mode
while off hook. After on hook, the telephone will automatically return to Pulse-dialing mode.
