Aristel
SLT70 OPERATION MANUAL
Aristel
,
the Best in Telecommunications
11
Note:
1. If the telephone is used as extension of a KTS, you must do the above setting to
enable redialing, ARS/LCR and so on.
2. The telephone can be set three groups of CO hunting code (each group Max. 8
digits)
3. Press
REDIAL
Key to put in one unit “A”. If the 2nd &3rd Group CO Hunting Code
include “A”, this digit is freewill-number.
4. When Re-dialing, Dial-back (incoming, outgoing or VIP number), it defaults the1st
group CO Hunting Code.
4.4.6
Busy Tone Parameter Setting
Setting Status — 09+
cfm
Key + Busy Tone On-1 Detection Time (0~199) +
cfm
Key
Default: 023 (23*15ms=345ms, unit: 15ms)
Setting Status — 10+
cfm
Key + Busy Tone Off-1 Detection Time (0~199) +
cfm
Key
Default: 023 (23*15ms=345ms, unit: 15ms)
Setting Status — 11+
cfm
Key + Busy Tone On-2 Detection Time (0~199) +
cfm
Key
Default: 033 (33*15ms=495ms, unit: 15ms)
Setting Status — 12+
cfm
Key + Busy Tone Off-2 Detection Time (0~199) +
cfm
Key
Default: 033 (33*15ms=495ms, unit: 15ms)
Note:
The telephone can set two groups of Busy Tone Detection Parameters.
KTSs may have two kinds of Busy Tone, one supplied by the carrier; the other is
internal Busy Tone of the system. Some functions of this telephone can work in
conjunction with Busy Tone Detection Technology.
4.4.7
Transfer Key Flash Time Setting
Setting Status — 13+
cfm
Key + Flash Time (0~199) +
cfm
Key
Default: 030 (30*10ms=300ms, unit: 10ms).
4.4.8
Pause Time Setting
Setting Status — 14+
cfm
Key + Pause Time (0~199) +
cfm
Key
Default: 033 (33*30ms=990ms, unit: 30ms).
4.4.9
Ring off Time Setting
Setting Status — 15+
cfm
Key + Ring off Time (0~199) +
cfm
Key
Default under General Mode: 100
(100*10ms=1000ms,
unit: 10ms
)
Default under
Aristel
KTS Mode:
004 (6*10ms=40ms,
unit: 10ms
)
