Aristel
SLT70 OPERATION MANUAL
Aristel
,
the Best in Telecommunications
9
3.
After DSS-defined-code setting, also do set the DSS Key’s function (Co. / Et.).
If set as “CO”, telephone can automatically add a CO Hunting code, then start
dialing.
Using:
1.Press DSS Key directly to dial the DSS-defined-code.
E.G.:
In
Aristel
KTS, the Function-code of meet-me-page is “# * ”, After define DSS5
Key as “# * ” and set DSS5 Key’s attribute as Ext., DSS5 can provide one-touch
function of meet-me-page.
2.This definition can be used in conjunction with ARS/LCR setting to achieve more
functions.
4.4 System Function Setting
4.4.1
ARS/LCR Setting
Setting Status — 00+
cfm
Key +Initial Code (Max: 8 digits) +
cfm
Key
Note:
1. a: Means DSS Key no. Only DSS1~DSS3 can use this function.
Press corresponding DSS Key (DSS1~3) to make choice.
2. b: Means Initial Code group no.
Press
?
/
?
Key to change group no. Each DSS Key provides 30 (00~29) groups.
3. If the Initial code of dialing number is the same as any one among group
no.00~29, the telephone will automatically add the corresponding
DSS-defined-code (this code can be put in flash, pause, voice ID and so on, see
Chart 4.3), then dialing.
4. DSS1-DSS3’s function should be defined as “CO” to enable ARS/LCR function.
4.4.2
Restricted Code Setting
Setting Status — 00+
cfm
Key + DSS4+
Restricted number (Max: 8 digits) +
cfm
Key
Note:
1. Press DSS4 Key to change a (1
st
digit) as “4”, and then enter restricted number
setting.
2. a: means Restricted group no.
10M01D
101-
a. 1
st
digit
b. (2
nd
+3
rd
) digits
10M01D
401-
a. 1
st
digit
b. (2
nd
+3
rd
) digits
