background image

AN1808-12S

 

4G

 Audio Intercom (E2.2) 

 3/16 

Thank you for purchasing 

AN1808-12S

 4G audio intercom. Please read this manual carefully 

before using. 

Be sure to keep this manual for future reference in case of any problem or questions. 

Important Safety Instructions 

When using this intercom, basic safety precautions should always be followed to reduce the risk of 

fire, electric shock and personal injury. Please read the following before using your equipment. 

1. Follow all warning and instructions on the product.

2. Unplug all the connections of product before cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.

3. Do not use this product near water.

4. Do not use this product near an area where there is a potential of gas leaks or near any fumes that

can be explosive.

5. Do not place this equipment near or over a radiator or any other heat source.

6. Do not overload the wall outlet or power cord where the power adapter is installed. This can result

in fire or electric shock

7. Avoid spilling liquid on this equipment and do not insert any objects through the ventilation slots.

8. Avoid using the equipment during an electrical storm. There is a remote risk of electrical shock

from lighting.

Содержание AN1808-12S

















Отзывы: