AN1204 3G Intercom
13
Revision E16
,Oct 2015
For Caller ID recognition to open the door or gate you need to program the mobile numbers and country
code into the memory before using.
Example:
Ireland Country code: 353 (UK: 44 / USA: 1)
086 5683624 (mobile number 1)
086 5682554 (mobile number 2)
086 2235644 (mobile number 3)
Command to use: *12*1234#
71
[country code]#
72
[
relay
] phone number] #
72
[
relay
][ phone number]
#
72
[
relay
][ phone number] #.......
SMS format:
*12*1234#
71
353#
72
1
0865683624#
72
1
0865682554#
72
2
0862235644#
To delete phone numbers of dialing in to open
SMS format: (to delete phone number 1 and 2)
*12*1234#
73
0865683624#
73
0865682554#
SMS format: (to delete all numbers)
*12*1234#
73*#
After the numbers are programmed you can also send the text message to check the stored numbers by
sending SMS format *21# , then the 3G intercom will reply the phone number list text message.
2. Access control password to open
Dial the SIM card telephone number. The unit will answer the call and you will hear a bleep tone.
To trigger relay 1 by pressing *33*5678#
To hold relay 1 by pressing *34*5678#
To release relay 1 by pressing *35*5678#
To trigger relay 2 by pressing *36*5678#
To hold relay 2 by pressing *37*5678#
To release relay 2 by pressing *38*5678#
*Above operation same as sending SMS commands
*This is for door open option for telephone numbers not stored.
